Tascam DM-3200, Руководство пользователя

Страница: 27 / 120

2 – Basic operational concepts : About projects and libraries
TASCAM DM-3200 Owner’s Manual
27
Setting the date and time
To set the date on the DM-3200, follow the steps
below:
1 Enter the
UTILITY
screen, and jump to the
SYSTEM
page:
2 Move the cursor to the
DATE UTILITY
section of
the screen,
3 Use the cursor and dial to set the date and
time.
Note that the month is a three-letter abbrevia-
tion of the English month name (
JAN
,
FEB
,
MAR
,
APR , MAY , JUN , JUL , AUG , SEP , OCT , NOV , DEC ) and
the hours are set in 24-hour (“military”) for-
mat.
4 When you have set the values, press
ENTER
.
The DM-3200 shows a confirmatory pop-up
message (
Date change was applied ).
The calendar in the DM-3200 takes account of the
different month lengths, including leap years (up to
and including the year 2096—you may want to con-
sider an upgrade after that time!).
More seriously, the clock is backed up by the DM-
3200’s internal battery. This battery should last for
several years. In the event of the battery running low,
(you can use the
OPTION/PREFERENCES screen to
check), consult your TASCAM supplier.
Creating a new project
When creating a new project, the project can be cre-
ated from scratch, with manually selected sampling
frequency, surround mode and mixer settings, taking
the settings from a selected prior project that acts as a
template, from preset library settings, or from the
current settings.
1
With the ALT indicator lit, press PROJECT so
that the NEW PROJECT page is shown:
2
To set up a new project from scratch: set the
current sampling frequency and surround
mode for the project in the top left sections of
the screen.
Use POD 4 to select an existing project on the
card to use as a template from which settings,
etc. can be copied to the new project.
3
You can use the current settings, preset set-
tings or select the settings from the template
using the wheel. Press
ENTER
to confirm these
settings.
4 Use the cursor keys to select the options which
include using the current settings, the preset
settings, and the project selected at the right of
the screen that can be used a a template. Press
ENTER to confirm these settings as well.
TIP
To set all options as CURRENT , TEMPLATE or PRESET , use
the BATCH SETUP at the top left as a short cut.
5
Move the cursor to the on-screen CREATE but-
ton and press
ENTER,
following instructions
on screen until the project is created.
Using a template
Alternatively, if you already
have projects stored on the card, you can select one
of these to be used as a template. This is useful if
your facility regularly handles a certain type of
project with similar settings, as it allows you to set up
the DM-3200 with known parameters and to main-
tain consistency between projects.
Figure 2.22: Setting the date and time
Figure 2.23: The NEW PROJECT page