16
TASCAM DM-3200 Owner’s Manual
2 – Basic operational concepts
NOTE
Please take the time to read and understand this sec-
tion, so that you understand how the basic navigation
and parameter editing operations are performed.
Dedicated screen mode selection keys provide access
to the different screens shown on the LCD display:
Press one of these keys to access the screen marked
above the key in “normal” (for example, key
4
is
used to select the
AUX 7-8
screen).
For the alternative screen available from many keys,
press the
ALT
key so that the
ALT
indicator lights
(see “Smart keys” on page 16 for details of the
behavior of this key), and then the appropriate key to
select the screen whose title is written in inverted
characters above the key. For example, key
7
nor-
mally brings up the
AUX 1-2
screen, but using this key
with the
ALT
key brings up the
OPTION
screens. Note
that some keys (e.g. the
LIBRARY
and
ROUTING
keys) are marked as “alternative” screens only, but
these keys do not need the
ALT
key to be pressed to
access their screens.
Many screens accessed with these keys include sub-
screens or “pages”. These sub-screens can be
accessed using the POD keys (“The PODs” on
page 18) or repeated presses of the same control key
will cycle through these pages.
Use the cursor keys to navigate around the screen
(sometimes, the dial can also be used to navigate).
Radio buttons (exclusive-or options) or checkboxes
(options) are set and unset using the
ENTER
key
when the cursor highlights the option.
When a parameter is selected, the dial is usually used
to change the value.
For non-numerical values changed using the dial,
usually
ENTER
should be pressed to confirm the
entry. Note that while the parameter is being edited,
the displayed parameter blinks on screen, and the
cursor cannot be moved until the new value is con-
firmed with the
ENTER
key.
For a few parameters (chiefly connected with the
remote unit location facilities), the number keys can
also be used when the number is selected using
ENTER
. Confirm the entry of a value made in this
way by pressing
ENTER
.
Smart keys
The DM-3200 features five “smart keys”: the
ALT
key and four “talkback” keys (
DIM
,
MONO
,
TO
SLATE
and
TO STUDIO
). When the status of any of
these keys is off, and the key is then pressed very
briefly and released, the status of the key, as shown
by the indicator, is changed to on after the key is
released (latching).
If the status of the key is off, and the key is pressed
and held down, the status is only changed as long as
the key is held down (non-latching).
If the status of one of these keys is on, the length of
the key press makes no difference—the key status
changes to off when the key is released.
What’s on the screen?
For almost all the screens displayed by the DM-3200,
there are two common areas. The first is at the top,
and we explain that area here (the second is the row
of labels which identify the POD functions
(described in “Special controls” on page 18)).
These top and bottom areas are for display, and their
contents are automatically determined (they cannot
be edited).
Figure 2.1: Control keys
Содержание DM-3200
