Tascam DM-3200 страница 10 Скачать руководство пользователя | Manualshive

Страница: 10 / 120

background image

1 – Introduction : About the DM-3200

10

TASCAM DM-3200 Owner’s Manual

About the DM-3200

The DM-3200 provides a fully comprehensive range
of I/O facilities. Almost all inputs and internal busses
are “soft”, allowing connections to be patched inter-
nally (naturally, routing configurations may be stored
and recalled).

Inputs

For analog input, the DM-3200 provides

sixteen balanced inputs, with both high-quality mic
amps, and balanced line connections as well as ana-
log insert points (both mic and line connections may
be made to the same channel at the same time, but
only one may be used at a time). There are also four
assignable send outputs and inputs for external loop
effects.

The digital side comprises three TDIF I/O ports, as
well as ADAT “lightpipe” I/O, and two pairs of ste-
reo S/PDIF or AES/EBU inputs and outputs.

Two TASCAM-standard card slots provide I/O
expansion capabilities, with a variety of digital or
analog options being available, including a FireWire

expansion card for direct high-speed bidirectional
communication between a DAW and the DM-3200.

Channel modules

The DM-3200 provides 48

channel modules. These may be freely assigned
internally to the 16 buss modules.

Of these 48 channel modules, 32 are “full-function”
modules with 4-band EQ, digital trim and phase, and
full dynamics processing with compressor/expanders
and gates. The other 16 are more basic in the facili-
ties provided, but still provide full buss assignment
and aux sends.

The first 32 EQ-enabled channels can have two
sources (input and return), which may be freely
assigned, and can be switched, depending on whether
the project is in the recording or tracking stage. See
the section on assignments (“Routing & assignment”
on page 46) for details of how channel sources are
assigned,

Figure 1.1: Basic logical components of the DM-3200

a

a. Note that cascade connections are not available on the first release of the DM-3200 software.

³

³

³

³

Mic/Line inputs

(x 16)

TDIF x 24

ADAT x 8

Mixer channels

Inputs (har

dwarte)

Channel destinations

Outputs (har

dwar

e)

Stereo outs

(analog & digital)

CR outs

Studio outs

Cascade

Option slots

Assignable sends

x 4

Stereo buss

Busses

(x 16)

Aux sends

(x 8)

Direct outs

(x 32)

Assignable internal

inserts (x 16) —
full-EQ channels

only

16 non-EQ

channels

32 full-EQ

channels

Assignable returns

(x 4)

2-track in

Cascade

Option slots

ADAT inputs

(x 8)

TDIF inputs

(x 24)

Digital stereo

inputs (x 2)

«
...
8
9
10
11
12
...
»

Содержание DM-3200

























































































































Отзывы:

Нет отзывов

Похожие инструкции для DM-3200

Бренд: Bamix Страницы: 11

Бренд: Yamaha Страницы: 28

Бренд: Mackie Страницы: 24

Бренд: STS Страницы: 71

Бренд: Kasanova Страницы: 22

Бренд: Mackie Страницы: 40

Бренд: Westinghouse Страницы: 3

ActiveCare 3500

Бренд: Cura1 Страницы: 2

Profi Cook UM 290

Бренд: Clatronic Страницы: 54

Бренд: Worcraft PROFESSIONAL Страницы: 46

Бренд: Gorenje Страницы: 47

Бренд: Kasanova Страницы: 24

Бренд: DAPAudio Страницы: 18

Бренд: Orava Страницы: 18

Бренд: Beko Страницы: 100

Бренд: Beko Страницы: 112

Bass Brutalist V1.2

Бренд: GOD CITY INSTRUMENTS Страницы: 5

Бренд: Rane Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды