Tascam DM-3200 Скачать руководство пользователя | Manualshive

Страница: 30 / 120

background image

2 – Basic operational concepts : Library management

30

TASCAM DM-3200 Owner’s Manual

Library management

The following libraries are available within each
project on the DM-3200 for storing and recalling
commonly-used settings:

• Snapshots (scene memories)
• EQ settings
• Compressor/expander settings
• Gate settings
• Effect settings (for internal effects 1 and 2)
Up to four card-stored banks of each library type are
available in each project. These banks are indepen-
dent of each other and independent of the banks in
other projects.

It is, of course, possible to copy library entries (or
entire banks) between projects, as well as using exist-
ing projects as templates, allowing favorite effect set-
tings, for example, to be used throughout a group of
projects.

There is also an internal bank, containing read-only
preset settings, which can be accessed by all projects.

In each bank, there may be up to 128 entries. The
entries in the internal banks comprise read-only pre-
sets, which may be used unchanged, or recalled and
used as the basis for original settings.

Library entries may be named and are automatically
time-stamped, to provide a reference for just when
and why a particular effect or setting was created.

Management of the library banks and the library
entries contained in them is done from within a spe-
cial utility screen accessed from a pull-up menu.

Note that all libraries are very similar in their basic
operation, and differ only in details. If there are any
specific differences relating to an individual library,
they are described in the appropriate section of the
manual.

To enter the library management screen, insert a for-
matted CF card (or insert a blank card and format

it—see “Formatting a new card” on page 24) and
press the

LIBRARY

key:

Use the POD 1 key to pull up the menu which allows
a jump to the appropriate library.

Use the POD 1 dial to highlight the required option
in the menu, and the POD 1 key or

ENTER

key to

select the highlighted option.

In most library screens, a small graphical representa-
tion of the currently-loaded setting (snapshot, EQ
setting, etc.) occupies the top left of the screen, while
the top right part of the screen is used to show a cor-
responding representation of the currently high-
lighted library entry.

Using library banks

Select the bank within the

current project by using the cursor keys to highlight
the

PRESET

or

CF BANK

to be used, and pressing

ENTER

.

This bank is used to recall a preset or previously
stored setting or to store the current settings.

• Current data is always stored on the left side of the

library screen, and the library data in the currently-
selected bank and slot is shown on the right.

Bank selection can also be done by pressing the

+

and

–

keys to the left of the display in the

LIBRARY

section with the

SHIFT

key pressed, when the current

banks is selected for this purpose in the

OPTION

screen.

Figure 2.26: Library management (gate library

shown as example)

Figure 2.27: Library selection pull-up menu

«
...
28
29
30
31
32
...
»

Содержание DM-3200

























































































































Отзывы:

Нет отзывов

Похожие инструкции для DM-3200

Бренд: Laney Страницы: 20

Бренд: Hamilton Beach Страницы: 4

Бренд: M-Audio Страницы: 8

Бренд: Oster Страницы: 24

Бренд: VOX electronics Страницы: 67

Бренд: Mutable Instruments Страницы: 3

Бренд: UFESA Страницы: 52

BON APPETIT BONMIX

Бренд: Optimum Страницы: 23

Бренд: Clatronic Страницы: 48

Бренд: SPACE POST ELECTRONICS Страницы: 5

Epic Polar Boost

Бренд: Lithium Grim Страницы: 13

Бренд: CombiSteel Страницы: 10

BLACK LABEL SERIES

Бренд: EBS Страницы: 2

Бренд: Nady Audio Страницы: 12

Бренд: Sima Страницы: 15

Бренд: Axel Страницы: 19

Бренд: Samson Страницы: 2

Mini-Deja’Vibe CS-MDV-1

Бренд: Fulltone Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды