Tandberg Data MSERIES USER, Руководство пользователя, Страница: 81 / 190

Chapter 3 Changing the Library Configuration
Changing the Ignore Host Lock Setting
Tandberg Data M-Series User’s Guide 65
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Changing the Ignore Host Lock Setting
3
The
Ignore Host Lock
option controls whether the library can release the
mailbox when the host has issued a SCSI command to lock the media:
• Enabling this option allows you to release the mailbox even when the
host has issued a SCSI command to lock the media.
• Disabling this option causes the library to display an error message
when you try to release the mailbox when the host has locked the
media.
To change the
Ignore Host Lock
setting:
1
Access the
Configuration
screen (see Accessing the Configuration
Screen on page 49).
2
Press the
Up
or
Down
buttons until
Ignore Host Lock
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Ignore Host Lock
setting. The available settings are
Enabled
or
Disabled
(default).
5
Press
Select
.
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Note:
This setting takes effect when you reboot the library.
Note:
This setting takes effect when you reboot the library.