Tandberg Data MSERIES USER, Руководство пользователя, Страница: 69 / 190

Chapter 3 Changing the Library Configuration
Changing the Terminator Power Setting
Tandberg Data M-Series User’s Guide 53
5
Press
Select
.
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
If desired, repeat steps 2 through 5 to set the SCSI ID for another tape
drive.
7
Press
Main
to return to the main screen.
Changing the Terminator Power Setting
3
The
Terminator Power
option controls whether the library robotics
provide terminator power.
To enable or disable robotics terminator power:
1
Access the
Configuration
screen (see Accessing the Configuration
Screen ).
2
Press the
Up
or
Down
buttons until
Terminator Power
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Terminator Power
setting. Available settings are
Enabled
(default) and
Disabled
.
5
Press
Select
.
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Note:
This setting takes effect when you reboot the library.
Note:
This setting takes effect when you reboot the library.