Tandberg Data MSERIES USER, Руководство пользователя, Страница: 56 / 190

Chapter 2 Basic Operations
Removing the Magazines
40 Tandberg Data M-Series User’s Guide
4
Grasp the handle at the front of the desired magazine and pull it
forward and out of the library.
5
When you are finished adding or removing cartridges from the
magazine, replace it in the library and close the magazine access
door.
6
On the
Release Magazines
screen, press
Re-Lock
.
The library locks the magazine access doors and inventories the
magazines. When the inventory is complete, the GUI displays the
main screen.
Removing a Magazine when the M2500 Library is Powered Down
2
To remove a magazine when the library is powered down:
1
Look through the viewing window and verify that all cartridges are
fully seated either in a magazine slot or in the robotic hand.
2
To remove the level 1 left magazine:
a
Press the button next to the top left magazine access door and
open the door.
b
Grasp the handle at the front of the level 1 left magazine and pull
it forward until it stops.
c
If the magazine stops after the first slot, perform steps 2d through
2h to remove it.
Caution:
You can damage the library severely if you try to
remove a magazine when one of the data cartridges is
not fully seated.
Note:
If the
Import/Export
option is set to
1-Slot
or
MAP
, you will
only be able to pull out the top left magazine far enough to
access the first magazine slot.
If the
Import/Export
option is set to
None
or
10-Slot
(
12-Slot
for LTO libraries) you will be able to pull the top left
magazine all the way out of the library.