Tandberg Data MSERIES USER Скачать руководство пользователя страница 54

Страница: 54 / 190

Chapter 2 Basic Operations
Removing the Magazines

Tandberg Data M-Series User’s Guide

To remove the left magazine:

Using a slender object such as a pen, press and hold the magazine

release button (see

figure 25

Grasp the handle at the front of the left magazine and slide it

forward and out of the library.

Figure 25 Magazine
Release Button

To remove the right magazine, grasp the handle at the front of the

magazine and slide it forward and out of the library.

Removing a
Magazine from an
M2500

The method for removing the magazines differs depending on whether

the M2500 library is powered up or down:
• To remove a magazine from the M2500 library when it is powered

up, see

Removing a Magazine when the M2500 Library is

Powered Up

• To remove a magazine from the M2500 library when it is powered

down, see

Removing a Magazine when the M2500 Library is

Powered Down

Magazine
release
button

Содержание MSERIES USER































































































































































































Результаты поиска

Содержание MSERIES USER

Отзывы:

Tandberg Data MSERIES USER, Руководство пользователя, Страница: 54 / 190

Результаты поиска

Содержание MSERIES USER

Отзывы: