Tandberg Data MSERIES USER, Руководство пользователя, Страница: 70 / 190

Chapter 3 Changing the Library Configuration
Changing the Emulation Setting
54 Tandberg Data M-Series User’s Guide
Changing the Emulation Setting
3
The
Emulation
option allows you to set the library to act as either a
Quantum ATL library or an M4 Data library.
To set the emulation:
1
Access the
Configuration
screen (see Accessing the Configuration
Screen on page 49).
2
Press the
Up
or
Down
buttons until
Emulation
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Emulation
setting.
The available settings are
M2500
,
1500
, and
M4 Data
.
5
Press
Select
.
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Changing the Storage Slot Count Setting
3
The
Storage Slot Count
option controls how many storage elements are
reported to the SCSI host.
Note:
The default setting for the M1500 is
M4 Data
; the default
setting for the M2500 is
M2500
.
Note:
This setting takes effect when you reboot the library.
Note:
When changing this option setting in a multiple library stack,
you must use the GUI on the SCSI master (the library module
connected to the SCSI host) in order for the changes to take
effect.