Tandberg Data MSERIES USER, Руководство пользователя, Страница: 53 / 190

Chapter 2 Basic Operations
Removing the Magazines
Tandberg Data M-Series User’s Guide 37
2
Press the button corresponding to the magazine you want to release:
• To release both magazines, press
Both
.
• To release the left magazine, press
Left
.
• To release the right magazine, press
Right
.
The GUI indicates that the magazine or magazines have been
released.
3
Press the button next to the desired magazine access door and open
the door.
4
Grasp the handle at the front of the magazine and pull it forward and
out of the library.
5
When you are finished adding or removing cartridges from the
magazine, replace it in the library and close the magazine door.
6
On the
Release Magazines
screen, press
Re-Lock
.
The library locks the magazine access doors and inventories the
magazines. When the inventory is complete, the GUI displays the
main screen.
Removing a Magazine when the M1500 Library is Powered Down
2
To remove a magazine when the library is powered down:
1
Look through the viewing window and verify that all cartridges are
fully seated either in a magazine slot or in the robotic hand.
2
Press the button next to the magazine access door.
The magazine access door opens.
Caution:
You can damage the library severely if you try to
remove a magazine when one of the data cartridges is
not fully seated.