Tandberg Data MSERIES USER, Руководство пользователя, Страница: 76 / 190

Chapter 3 Changing the Library Configuration
Changing the Barcode Scanner Setting
60 Tandberg Data M-Series User’s Guide
Changing the Barcode Scanner Setting
3
The
Barcode Scanner
option controls whether the bar code scanner is
enabled or disabled. When the scanner is enabled, the library attempts to
detect a bar code on all tape cartridge labels. If the correct bar code labels
are not used, or if some cartridges are not labeled, scanning time may be
greatly increased. Therefore, it is recommended that you disable the
Barcode Scanner
option if you do not intend to use compatible bar code
labels.
To enable or disable the
Barcode Scanner
option:
1
Access the
Configuration
screen (see Accessing the Configuration
Screen on page 49).
2
Press the
Up
or
Down
buttons until
Barcode Scanner
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Barcode Scanner
setting. The available settings are
Enabled
(default) and
Disabled
.
5
Press
Select
.
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Changing the Baud Rate Setting
3
The
Baud Rate
option controls the baud rate setting of the serial
diagnostics port. You can set the baud rate to any standard rate between
1200 baud and 38400 baud.
To set the
Baud Rate
:
1
Access the
Configuration
screen (see Accessing the Configuration
Screen on page 49).
Note:
This setting takes effect when you reboot the library.