Tandberg Data MSERIES USER, Руководство пользователя, Страница: 75 / 190

Chapter 3 Changing the Library Configuration
Changing the Off-Line Time Setting
Tandberg Data M-Series User’s Guide 59
4
Use the
Up
or
Down
buttons to select the desired
Illumination
setting.
The available settings are
Enabled
(default) and
Disabled
.
5
Press
Select
.
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Changing the Off-Line Time Setting
3
When you access the
Menu
screen using the GUI, the library becomes
NOT READY and will not respond to any SCSI commands issued. If you
leave the library unattended in menu mode, the library goes back to a
READY state after a pre-set time-out, controlled by the
Off-Line Time
option. You can set this time-out to any value from 1 to 99 minutes, or
turn it off.
To set the
Off-Line Time
:
1
Access the
Configuration
screen (see Accessing the Configuration
Screen on page 49).
2
Press the
Up
or
Down
buttons until
Off-Line Time
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Off-Line Time
setting.
The available settings are
1
through
99
and
Disabled
(default).
5
Press
Select
.
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
Press
Main
to return to the main screen.