Tandberg Data MSERIES USER, Руководство пользователя, Страница: 112 / 190

Chapter 7 Running the Demonstration Programs
Running the Demo 4 Program
96 Tandberg Data M-Series User’s Guide
Running the Demo 4 Program
7
The
Demo 4
program causes the robot to pick a randomly selected
cartridge from its magazine slot and place it in another randomly selected
magazine slot.
To run the
Demo 4
program:
1
Verify that at least:
• Two library modules are installed in the stack
• One magazine is installed in each library module
• One cartridge is present
2
Access the
Demo Programs
screen (see Accessing the Demo Programs
Screen on page 91).
3
Press the
Up
or
Down
buttons to select
Demo 4
.
4
Press
Select
.
The
Demo 4
program starts. This program continues until you press
the
Stop
button.
5
To stop the program, press
Stop
.
The GUI displays a status screen listing the demonstration program
number, the number of cycles completed, and the status of the test:
pass or fail.
6
Press
Back
to return to the
Demo Programs
screen.
Note:
This program is for multiple library stacks only.