Tandberg Data MSERIES USER, Руководство пользователя, Страница: 111 / 190

Chapter 7 Running the Demonstration Programs
Running the Demo 3 Program
Tandberg Data M-Series User’s Guide 95
Running the Demo 3 Program
7
The
Demo 3
program causes the robot to pick a cartridge from a randomly
selected occupied magazine slot and place it back in the same slot. The
robot then moves to another randomly selected occupied slot and repeats
the process.
To run the
Demo 3
program:
1
Verify that at least one magazine is installed in the library and that at
least one cartridge is present.
2
Access the
Demo Programs
screen (see Accessing the Demo Programs
Screen ).
3
Press the
Up
or
Down
buttons to select
Demo 3
.
4
Press
Select
.
The
Demo 3
program starts. This program continues until you press
the
Stop
button.
5
If desired, include the drives or the fixed slot in the test:
a
If the library is an M1500 in a multiple library stack or an M2500,
press the
Level
button to select the level where the desired drive
or fixed slot is located.
b
Press
Drive 1
or
Drive 2
to include a drive.
c
Press
Fixed
to include the fixed slot.
6
To stop the program, press
Stop
.
The GUI displays a status screen listing the demonstration program
number, the number of cycles completed, and the status of the test:
pass or fail.
7
Press
Back
to return to the
Demo Programs
screen.