➤
Connecting the printer
Make sure that the printer is set to the correct volt-
age (e.g. 230 V in Europe, 120 V in the U.S.A.). To
do this, check the plate above the power inlet at the
rear of the printer.
If the setting is incorrect, set the coloured switch at
the rear of the printer to the correct position, using a
pointed object (e.g. screwdriver, ball pen or
tweezers).
120V
Make sure that the printer is switched off
before setting the correct voltage; other-
wise severe damage may be caused.
Never switch on the printer if the voltage
setting is incorrect, since this may cause
severe damage to the printer.
STOP
Reference manual
Installation
7