➤
Menu handling
You can navigate in the current menu using the four function and selection
keys arranged below the LC display field. Each function and parameter dis-
played in the LCD is executed or selected by the corresponding key below,
respectively. Usually two parameter groups are combined at one level. In
the following example, these are the LPI and Skip parameter groups.
If you do not wish to change one of the two
parameters you can either press the Next key (to
access the two following parameter groups in the
menu), or you can press the Back key (to access
the two previous parameter groups in the menu). If
you want to change a setting, (e.g. the line density),
then press the LPI key (LPI = lines per inch) to
access the actual parameter level. The currently
valid setting is marked by a
*
(in the example below
the current setting is 6 lpi). With the < and > keys
you can view the other parameters available for this
setting.
➤
Save settings
Once the desired parameter is displayed on the LC display, you can save it
by pressing the Set key. The parameter is then set and the printer auto-
matically displays the parameter groups again. With the Exit key you can
leave the sublevel without saving your changes.
back to
the previous
parameter groups
on to
the next
parameter groups
LPI Skip
Back Next
6 LPI
*
Set < > Exit
Skip = 0.0 Inch *
Set < > Exit
Reference manual
The Menu
66
