Make sure to align the paper stack in parallel with
the printer and that the paper flow is unobstructed.
Reinsert the rear cover vertically and lower it
towards the rear.
Slide the cover towards the rear to the stop; this will
leave a slot for the paper.
Swing the noise absorbing element back to the rear,
if applicable.
Switch the printer on. It will perform a self-test and
then go to online mode.
Paper may remain inserted in the front
and rear tractors at the same time. This
is made possible by moving the paper in
the inactive tractor automatically to the
parking position whenever changing the
paper path.
Reference manual
2T model
57
