Parameter group
Parameter
Description
Barcode
On/Off*
With this function selected it is posible to print different barcodes and LCP (Large
Character Printing). The definition and activation is performed by special sequences
through the interface. Since this selection is possible for all emulations it must be
noted that con-flicts in sequence conformity with the selected emulation may occur.
For this reason the barcode function can also be switched on and off by MTPL
sequences. (The possible barcodes, LCP characters and the operation of these
functions are described in the
Barcode Programmer’s Application Manual
).
Barmode
Secured
Unsecured*
In secured mode, the space which the barcode characters require is “protected”. In
each line, other barcode or normal characters can also be printed.
These additional characters are printed in the line currently being printed and and in
the subsequent lines, without affecting the barcode which is already being printed.
Consequently, normal characters can be printed in every line to the right or left of the
barcode.
In unsecured mode, the required paper transport for printing barcodes and LCP is
carried out automatically, it is not possible to print more than one line of normal
characters in the barcode line.
All characters in the mixed line are printed such that their bottom edges are in a
straight line. This function may be switched on and off by sequences.
FFmode
FFmode = Off*
FFmode = On
FFmode = On: If the paper is positioned in the first printing line, form feeds will be
ignored.
FFmode = Off: Form feed will be performed in all cases.
Reference manual
The Menu
82
