➤
LC printing
Certain professional applications may require unusually large character
sizes. Therefore your printer has the possibility of scaling standard size
characters up to factor 99 by means of control sequences.
The Header sequence defines the parameters (e.g. height) once. This
definition remains until the printer is switched off.
The printable LCP* information is transmitted in an LCP “bracket” (SI).
Two character sets are available:
US ASCII and
German
The printout of LCP characters can be selected in all of the emula-
tions. Prerequisite: Printer must be in Barcode mode.
Note that this printer supports some scalable fonts in the LQ-2170
emulation if a compatible driver is used.
* Large Character Printing
Reference manual
Emulations
161