➤
Increasing the printhead gap
(Head up)
Setting options: On/Off
Default setting: Off
If the parameter is set to On, the printhead gap increases during form feed
and line feed four lines before and after the perforation on the form (= pro-
tected zone). The printhead gap is always increased during form feeding
past the perforation even when feeding takes place outside the protected
zone.
Printing is possible in the protected area.
Confirm your settings by pressing the Set key (1).
Head up=Off *
Online
Setup
Set < > Exit
2
1
3
4
Reference manual
Mechanical adjustments to the printer
101
