Options and Accessories
➤
Options
The following options can be ordered for your printer.
Automatic cut sheet feeder,
rear (ASF-R)
The automatic single sheet feeder is suitable for single sheets and sets of
forms with 1 + 3 forms. Paper formats with a width of 100 to 368 mm may be
used. Each format in between can be set.
The single sheet feeder can only be installed on the standard printer. It cannot
be used in conjunction with the autocut facility and the 2T model.
Part No.: 054 804
Automatic cut sheet feeder,
front (ASF-F)
The automatic sheet feeder is suitable for single sheets. Paper formats with a
width of 150 to 365 mm may be used. Each format in between can be set.
It cannot be used in conjunction with the optional tractor 2.
Part No.: 061 218
Autocut facility
An additional module for automatic cutting (cannot be used in conjunction with
the rear automatic single sheet feeder)
Part No.: 054 806
Face down insertion
An additional module for the automatic single sheet feeder. The single sheets
are output with the face down.
Part No.: 054 807
Reference manual
Options and Accessories
201