➤
Selecting the rear tractor
The rear tractor can be selected either from an application program, the
paper path quick selection or via the setup menu. This chapter describes
the paper path quick selection; for information on how to make the set-
ting in the Setup menu, refer to
Setup mode
.
Make sure that the printer is in offline mode; press the Online key, if
necessary.
Press the Park key (1). If fanfold paper is loaded in the printer, it is trans-
ported to the tear position. Tear paper will be displayed. Then press any
key. If a single sheet is loaded in the printer, it will be ejected.
Press the Trac3 (4) key to select the rear tractor.
The printer returns to offline mode.
The display alternates between the basic menu and:
Offline Tractor1
Park Load
Online
Setup
2
1
3
4
Single Trac1
Trac2 Trac3
Online
Setup
2
1
3
4
If you do not make a selection within 5 seconds, the menu
is closed.
Load paper from
Tractor3
Online
Setup
2
1
3
4
Reference manual
2T model
59