Parameter group
Parameter
Description
PapOpt
AutoASF
AutoTRA
Off*
On
Off*
T1=T2
T1=T2=T3
Controls the optional automatic single sheet feeder (ASF) and/or the optional tractor.
This parameter group is only available if an optional single sheet feeder or tractor is
installed.
If an ASF is not installed, Off is displayed (factory default). If an ASF is installed and
the Off parameter is activated, only the selected source is supported (either via the
menu or an ESC sequence). If the selected paper source is empty, printing stops.
If an ASF is installed and you select On, the printer will load paper from the other
source if the selected one is empty.
If an optional tractor is not installed, Off is displayed (factory default). If an optional
tractor is installed and the Off parameter is activated, only the selected tractor is
supported (either via the menu or an ESC sequence). If the selected tractor is out of
paper, printing stops.
If an optional tractor is installed and you select T1=T2 (standard printer) or
T1=T2=T3 (2T model), the printer will load paper from the other tractor if the selected
one is empty.
For the 2T model, the selection priority is T2–T3–T1, i.e. if the selected T2 is out of
paper, the printer will first try to load paper from T3, then from T1. If the selected T3
is empty, the printer will first address T1, then T2. If T1 is selected and empty, first
T2, then T3 will be addressed.
Reference manual
The Menu
83