➲
The display remains dark
The printer is switched on, but nothing happens (nothing is displayed, no noi-
se).
Switch off the printer and proceed as follows:
1. Check that the power plug is correctly connected to the socket on the printer.
2. Check that the power plug is seated properly in the wall socket.
3. Switch on the printer again. If the printer is now connected correctly then the
LED for the selected sheet feelights up, Online is shown on the display and
the printhead moves to the start position.
If these steps do not eliminate the fault:
Replace the power cord and repeat step 3.
Check that power flows at the socket e.g. using a desk lamp, if necessary
use a different socket and repeat step 3.
Contact your dealer if the printer cannot be powered up.
Do not attempt to open the printer. You might suffer an electric
shock.
STOP
Reference manual
Troubleshooting
115
