2T model
➤
Introduction
This section describes how to handle the rear tractor (paper feed from
the rear), which is only available and permanently installed in the 2T prin-
ter model in addition to the primary tractor (paper feed from the front).
The Paperway parameter group in the menu of the 2T model differs
from the one of the standard printer as follows:
Standard printer
2T model
Paperway
Single*
Tractor1 (Standard, front)
Tractor2 (Optional, front)
Paperway
Single*
Tractor1 (Standard, front)
Tractor2 (Optional, front)
Tractor3 (Standard, rear)
The permanently installed rear tractor is identified as “Tractor3” in
the menu. “Tractor2“ in the menu refers to the optional tractor
which can be installed both on the standard printer and the 2T
model. The optional tractor 2 can be installed by the user.
* Not installed on some models.
Reference manual
2T model
53