Taconova TACOTHERM FRESH PETA ES 5941S, Руководство пользователя

Страница: 8 / 40

8
5 Start-up
Before start-up,
check the following:
• The system main switch (if available) is switched on.
• The controller is switched on or supplied with power.
• All segments of the display are shown for a short time (page 7).
• The software number and version appear (e.g. 519803 / SW 1.01).
If the controller then switches to the normal display, or, in the case of initial start-up or factory reset, to the
start menu, the internal function test was successful.
When started for the first time or af-
ter a factory reset BAS12 RESET , the
commissioning menu will appear. This is
for setting the basic parameters.
1 2
Example:
Change the language;
ENGLISH is active.
3. To select DEUTSCH , for example,
press the keys; DEUTSCH
will flash.
4. Confirm the selection with the
key. You can find further information
in section 7.9, page 23
COM01 LANGUAGE SELECTION .
The next parameter, BAS09 TIME , is
jumped to automatically.
3 4
5. Adjust BAS09 TIME using the keys
.
6. The setting is confirmed with
and the next value will appear.
5 6
The device will be restarted
when set-up is finished.
Input can be canceled with the key; the program then jumps to item 1. Important: The start-up menu must be carried out up to the
confirmation of the hydraulic variant and the restart.
deutsch english
english
BAS09
time 0000
:
°CkWh
K %
L/hmin
BAS09
time 0132
:
°CkWh
K %
L/hmin
BAS09
time 0132
:
°CkWh
K %
L/hmin