Taconova TACOTHERM FRESH PETA ES 5941S, Руководство пользователя

Страница: 12 / 40

12
6.4 SCH00 Return layering
Options
RLS option - Return layering is for ensuring
the temperature layering, e.g. in solar stor-
age tanks. With the VSR switching valve, the
return water can be charged in the storage
tank at 2 different heights.
Cable connections according to system
installation manual. The logic of the di-
verting valve can be set with parameter
SCH00 (see 7.9, page 23).
No voltage AB - A - (middle of storage tank)
Voltage AB - B (bottom of storage tank)
Attention: Phase for OPEN only:
Valve must be spring-loaded or go
to continuous voltage L'.
6.5 NAC00 Warming function
Options
STAND option - Ready/warming function is
for providing the DHW nominal temperature
value.
BAS01 TSET DHW plus minimal tempera-
ture loss
STE14 MIN. TDIFF HEAT EXCH on the heat
exchanger. The heat exchanger is held at
this temperature.
Sensor side
- B7
V2
+
-
Voltage 5 V DC
Ground GND
TWW sensor B6
Flow, sec. V1
- GND
- S2
Ground GND
PWM/ 0 ... 10 V S1
Ground GND
eBUS e
Mains side TKW sensor B5
N Ground GND
5 TPV sensor B4
4 - GND
3 RLS valve, return layer. - B3
2 WWC circulation pump Ground GND
1 PP primary pump TPR sensor, prim. Return B2
L’ Support phase Ground GND
L Phase 230 V TU1 sens. Tank, bottom B1
Sensor side
- B7
V2
+
-
Voltage 5 V DC
Ground GND
TWW DHW sensor B6
Flow, sec. V1
- GND
- S2
Ground GND
PWM/ 0 ... 10 V S1
Ground GND
eBUS e
Mains side TKW cold-water sensor B5
N Ground GND
5 TPV sensor, prim. Supply B4
4 -
- GND
3 B3
2 -
- GND
1 PP primary pump B2
L’ Support phase - GND
L Phase 230 V - B1