Taconova TACOTHERM FRESH PETA ES 5941S, Руководство пользователя

Страница: 21 / 40

21
7.7 Clock program
MENU
There are 3 individual clock programs
available in the controller for circulation,
thermal disinfection and recharging. 1 2
1. In the submenu, select the desired
time program for adjustment with the
key.
2. Select the day blocks 1 - 5, 6 - 7 or
the individual days with the
keys. Confirm the selection with .
3. The set time program can be queried
with the
key. The status for
the respective time can be shown
with "
ON " and " OFF ". Here, the start-
ing time for a change can also be
selected. Example: "00:00".
3 4
4. Select the desired action with .
TIME SELECTION , PHASE ON or
PHASE OFF . Example: Press
2x until PHASE OFF appears and set
the desired time until the next change
in the switching phase with
.
5. Select the desired action with .
Example: Press 2x until PHASE
ON appears and set the desired time
until the next change in the switching
phase with
.
If there are multiple switching phases,
repeat steps 4 and 5 alternately.
5 6
6. The input of switching times is exited
by pressing the
key. 1 x back to
step 3 in order to select a new day or
day block. If the
key is pressed
again, the question appears for
whether to
SAVE the time program,
yes / no . If you answer yes , the
changes will be saved. With no , this
is canceled and all changes will be
discarded, and then step 1 is
returned to.
After a timeout of approx. 2 minutes, the controller jumps back to the selected operating mode.
ZIR12
circ.time-
°CkWh
K %
L/hmin
day block
1-5
°CkWh
K %
L/hmin
INFO
on
time select 0000
:
°CkWh
K %
L/hmin
INFO
off
phase off 0400
:
°CkWh
K %
L/hmin
INFO
on
phase on
0800
:
°CkWh
K %
L/hmin
INFO
save
yes
i
°CkWh
K %
L/hmin
INFO
If the programmed data shall be deletetd, the programming must be left. If
not, the programmed data will be displayed in spite of "save no" was chosen!