SYMEO Local Positioning Radar System
Product Family LPR
®
-1DHP-200 – Product Documentation
Safety Notes
Copyright © Symeo GmbH 2018
DOC.EDO.000341.WORK.EN_LPR-1DHP-200_Product-Documentation.docx
Page 6 of 71
1 Safety Notes
General
The LPR
®
-1DHP-200 product family is a radar distance measurement sensor that may be
used to measure distances between a radar unit and a reflector or between two radar units.
LPR
®
-1DHP-200 radars are purely tracking and assistance systems.
They do not satisfy special requirements for personal or functional
safety or explosion protection.
All personnel that commission or operate an LPR
®
-1DHP-200 radar
have to be instructed that it does not satisfy norms and requirements for
functional safety (e.g. IEC 61058, EN ISO 13849, EN 62061).
Read the documentation before operation of the radar and follow the
included safety notes.
Take note of the safety and operating instructions of the system in
which you want to install the device.
Follow national safety norms and regulations.
Installation
Installation must be carried out by qualified and trained technicians.
When the system is mounted on fixed tubes, the necessary measures to
prevent slippage of the system must be taken.
Only screwed connections with safety against loosening may be used
for mounting the radar.
Adhere to the specified tightening torques for all screws and connectors.
Screwed connections must be examined at regular intervals, especially
if the radar is mounted exposed.
Repairs and Modifications
Repairs or modifications may only be performed by the manufacturer.
Opening of the device is prohibited.
Any change or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The warranty shall be voided if you cause defects to the device by
installing or exchanging system extensions.
