SYMEO Local Positioning Radar System
Product Family LPR
®
-1DHP-200 – Product Documentation
Device Setup via the Web User Interface
Copyright © Symeo GmbH 2018
DOC.EDO.000341.WORK.EN_LPR-1DHP-200_Product-Documentation.docx
Page 33 of 71
8.2 Sign In
In order to be able to change settings a sign in to the WebUI is necessary. Press therefore
“Sign In”
in the upper right corner of the WebUI. You will be prompted to enter your
information for authentication.
The dialog box with the username and password field will
appear (see
Figure 8.2
).
Figure 8.2: WebUI Login
Enter the user name "
symeo
" and the password "
54all2u
" and press "
Login
". Now your
status is displayed as "
Logged in
".
8.3 Initial Operation
When the WebUI is opened for the first time or after a software reset, the note “
Environment
uninitialized
” will appear (see
Figure 8.1).
During the initial operation, you need to configure the operating country, in
which you want to use this unit. This is necessary to abide to the radio
signal restrictions enforced by the local authorities. Your selection will
have impact on the selectable Bandwidth Modes as well as on the
maximum transmit power and hence range of the radar unit.
Since this is a mandatory setting, all functionality of this device will remain
disabled, until the country setting has been successfully configured.
Click the “
Configure environment
” button to configure the working environment.
