SYMEO Local Positioning Radar System
Product Family LPR
®
-1DHP-200 – Product Documentation
Device Setup via the Web User Interface
Copyright © Symeo GmbH 2018
DOC.EDO.000341.WORK.EN_LPR-1DHP-200_Product-Documentation.docx
Page 46 of 71
Figure 8.16: Radar target spectrum in a multiple target environment
Measurement Details for Secondary Radar Mode
In this menu, the following settings are available:
Customer specific offset (only Master mode)
o
This offset can be used to calibrate individual LPR
®
links to account for tolerances. It
is added to the measured distance
Minimum level
o
This parameter defines the required minimum level for valid measurements in
secondary radar mode. Measurements with a lower signal level will be discarded
Maximum occurring speed (only Master mode)
o
The maximum occurring speed is used internally to validate the measurement results
Diversity mode (only Master mode)
o
In diversity mode the measurement results of two LPR
®
-1DHP-200 units are
combined for optimum performance
Raw data output
o
Raw data can be provided by the unit for further analysis
RX attenuator mode
o
The RX attenuator can be enabled when the received signal is too strong.
VGA value
