Swann AMI Oxytrace, Руководство оператора

Страница: 72 / 98

70
A-96.250.531 / 300617
AMI Oxytrace QED
Program List and Explanations
2.2.1.4 Cal. History
Review the diagnostic values of the last calibration of the oxygen
sensor. Max. 64 data records are memorized.

Number : Calibration counter.

Date, Time : Date and time of the calibration.

Sat. Current : Saturation current at that time of calibration.

Air pressure : Air pressure at that time of calibration.
2.2.2 Miscellaneous :
2.2.2.1 Case Temp: Shows the actual temperature in °C inside the trans-
mitter.
Air pressure : Shows the actual air pressure in hPa
2.2.3 QA History
Review QA values (Number, Date, Time, Deviation oxygen, Devia-
tion Temperature, Status of QA check) of the last quality assurance
procedures.
2.3 Sample
2.3.301

Sample ID : Shows the assigned sample identification. This
identification is defined by the user to identify the location of the
sample

Temperature: Shows temperature in °C.

(Nt5K) : Shows raw value of the temperature in


Sample Flow : Shows the sample flow in l/h

(Raw value) Shows the sample flow in Hz
2.4 I/O State
Shows actual status of all in- and outputs.
2.4.1
2.5 Interface
2.5.1 Only available if optional interface is installed.
Shows the programmed communication settings.
Alarm Relay: Active or inactive.
Relay 1 and 2: Active or inactive.
Input: Open or closed.
Signal Output 1 and 2: Actual current in mA
Signal Output 3: Actual current in mA (if option is installed)