Swan Analytical Instruments AMI Hydrazine, Руководство оператора, Страница: 61 / 86

AMI Hydrazine
Program Overview
A-96.250.501 / 280915
59
8.5. Installation (Main Menu 5)
Sensors Temp.comp 5.1.1* * Menu numbers
5.1*
Signal Outputs Signal Output 1 and 2 Parameter 5.2.1.1 - 5.2.2.1*
5.2* 5.2.1* and 5.2.2* Current Loop 5.2.1.2 - 5.2.2.2*
Function 5.2.1.3 - 5.2.2.3*
Scaling Range Low 5.2.x.40.10/10*
5.2.x.40 Range High 5.2.x.40.20/20*
Relay Contacts Alarm Relay Alarm Hydrazine Alarm High 5.3.1.1.1*
5.3* 5.3.1* 5.3.1.1* Alarm Low 5.3.1.1.26
Hysteresis 5.3.1.1.36
Delay 5.3.1.1.46
Sample Flow Flow Alarm 5.3.1.2.1
5.3.1.2* Alarm High 5.3.1.2.2*
Alarm Low 5.3.1.2.36*
Sample Temp. Alarm High 5.3.1.3.1*
5.3.1.3* Alarm Low 5.3.1.3.26*
Case Temp. high 5.3.1.4*
Case Temp. low 5.3.1.5*
Relay 1 and 2 Function 5.3.2.1–5.3.3.1*
5.3.2* - 5.3.3* Parameter 5.3.2.20–5.3.3.20*
Setpoint 5.3.2.300–5.3.3.301*
Hysteresis 5.3.2.400–5.3.3.401*
Delay 5.3.2.50–5.3.3.50*
Input Active 5.3.4.1*
5.3.4* Signal Outputs 5.3.4.2*
Output/Control 5.3.4.3*
Fault 5.3.4.4*
Delay 5.3.4.5*
Miscellaneous Language 5.4.1*
5.4* Set defaults 5.4.2*
Load Firmware 5.4.3*
Password Messages 5.4.4.1*
5.4.4* Maintenance 5.4.4.2*
Operation 5.4.4.3*
Installation 5.4.4.4*
Sample ID 5.4.5*