Svantek SVAN 106, Руководство пользователя

Страница: 32 / 97

SVAN 106 User MANUAL
_
32
The Channel x position enables the user to assign the axis of three-axial
accelerometer for the specific channels, switch on or off channels or second
profiles, and to program the channels parameters as: transducer type
(Type) and weighting filter (Filter). The measurement range cannot be
changed
and is displayed only for information purpose. The
Channels Setup list is opened from the Measurement list.
Notice: The change of the profile parameters is not possible when the measurement is
performed. The user has to finish the current measurement.
Activation of channels
The first two positions enable one to switch on or off some channels and the
second profile from the calculation process.
In the Enabled Channels the user may select All, 1-3 or 4-6 channels to be
active during measurement. Other channels will be disabled and will not be
displayed.
Activation of second profiles
In the Enabled 2nd profiles the user may switch on or off result
calculations for the second profiles.
If second profiles are switched off, there will no be calculations performed
and displayed in different presentation modes and all positions with settings
for second profiles will be not active.
5.3.1 Assignment channels for the accelerometer axis - Channel/Axis Mapping
The Channel/Axis Mapping position enables one to assign channels to the
transducer’s axis. The user can assign channels 1,2,3 to the axis X, Y, Z of
the first transducer, connected to the Lemo compatible sockets type
ENB.0B.304 for Channels 1–3 and channels 4,5,6 to the axis X, Y, Z of the
second transducer, connected to the Lemo compatible sockets type
ENB.0B.304 for Channels 4-6.
If same channel is assigned to the more than one axis there will be error
detected and the user will be proposed to reassign the channels.
5.3.2 Setting parameters for channels – Channel x