Svantek SVAN 106, Руководство пользователя

Страница: 74 / 97

SVAN 106 User MANUAL
_
74
Selection the channel for analogue output
In the Channel position it is possible to select the channel which signal is assigned to the analogue out.
Digital output function selection of the I/O socket
In the Function position, it is possible to set the function of the digital
output of the I/O instrument’s socket. The socket can be used as the source
of the trigger pulse (Trig. Pulse) which starts the measurement in another
“slave” instrument linked to the “master” one or the alarm signal which
appears there after fulfilling certain measurement conditions (Alarm Pulse).
Polarisation selection of the digital output signal
In the Polarisation position, it is possible to select which polarisation of the
signal (negative or positive) will be valid.
Active level selection of the digital output signal
In the Active Level position, it is possible to select which level of the signal
should be treated as a valid one (“negative” or “positive” logic): Low or
High.
Alarm duration selection
In the Hold Time position, it is possible to select the minimum duration of
alarm signal.
8.3 Checking the powering of the instrument – Power Supply
The Power Supply enables the user to
check the powering of the instrument:
internal battery condition, source and
voltage of the external power supply, and
also set the battery type for checking their
condition.
<ENT>