Svantek SVAN 106, Руководство пользователя

Страница: 70 / 97

SVAN 106 User MANUAL
_
70
Replacement of the existing files by the new ones
This option is used in remote mode and for the files created by with the use
of Auto Save function. The result of the attempt to save the file with the
name, which already exists in the memory, depends on the setting of the
Replace. If position is active then the old file will be erased and the new file
will be saved with the same name.
The message is displayed that such operation is not available in the case
when this position is not active – cf. the description of the Save. In the other
case, the existing file is overwritten.
Controlling the measurement results savings
Using the Auto Save one can set the self-saving of the measurement
results with automatic number increment (Number) or to switch it off (Off).
This position was also established in order not to waist too much memory of
the instruments when the self-saving is not necessary. The Auto Name
position appears after switching on the Auto Save function.
Notice: The Auto Save function can be performed only in the case when the Meas. Period
(path: Menu / Measurement / General Settings) is not less than 10 seconds. If it is less than
10 seconds, the measurement results are not saved without any indication of that fact! There is
only one exception - when the Repetition Cycles (path: Menu / Measurement / General
Settings) is equal to one, the Auto Save function is executed disregarding of the value of the
integration period.
When the Meas. Period is too short for switching on the Auto Save option
or the Repetition No. is set to one the following message appears on the
display:
When the Auto Save option is active, after starting the measurements by pressing the <Start/Stop> push-
button the results are saved in the file with the selected name.
Another measurement is started after next pressing of the <Start/Stop> push-button. The measurement is
stopped after the selected Measa. Cycle Time (path: Menu / Measurement / General Settings ). The name
numbers of the next saved files are automatically incremented by one. The same remarks are valid in this
case as it was already stated in the description of the Save Next function.