Svantek SVAN 106, Руководство пользователя

Страница: 8 / 97

SVAN 106 User MANUAL
_
8
2. MANUAL CONTROL OF THE INSTRUMENT
The control of the instrument is developed in the fully dialogue way. The user can operate the instrument by
selecting the proper position from the Menu list. Thanks to that, the number of the control push-buttons of
the instrument is reduced to nine.
2.1 Control push-buttons on the front panel
On the front panel of the instrument, there are located the
following control push-buttons:
•
<ENTER>, (<Menu>), [<Save>],
•
<ESC>, (<Cal.>), [<S/P>],
•
<Shift>, [Markers]
•
<Alt>, [Markers]
•
<
5 5 5 5
>,
•
<
3 3 3 3
>,
•
<
4 4 4 4
>,
•
<
6 6 6 6
>,
•
<Start/Stop>.
The name given in (...) brackets denotes the second push-button function which is available after pressing it
in conjunction (or in sequence) with the <Shift> push-button. For the first two push-buttons the name given
in square brackets […] denotes also the third push-button function which is available after pressing it in
conjunction (or in sequence) with the <Alt> push-button.
<Shift> The second function of a push-button (written in red colour on a push-button) can be
used when the <Shift> push-button is pressed. This push-button can be used in two
different ways:
•
as Shift in the keyboard (e.g. while typing the filename); both <Shift> and the
second push-button must be pressed in parallel;
•
as 2nd Fun; this push-button can be pressed and released before pressing the
second one or pressed in parallel (while operating in “2nd Fun” mode, see the
following notice) with the second push-button.
The <Shift> push-button pressed in conjunction with the <Alt> one enables the user to
enter the Markers on the plots during the measurement.
<Alt> This push-button enables one to choose the third push-button function in case of
[<Save>] and [<Pause>] push-buttons. In order to select the third function the user must
press the <Alt> and the second push-button simultaneously.
Notice: The simultaneous pressing of the <Alt> and <Start/Stop> push-buttons switches the
instrument on and off.
<Start/Stop> This push-button enables one to start the measurement process, when the instrument is