Svantek SV 104BIS Скачать руководство пользователя страница 3

Страница: 3 / 180

104BIS User Manual

GENERAL WARNINGS, SAFETY CLAUSES, AND STANDARD
INFORMATION

Note:

If the equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

Note:

The

SV 104BIS

dosimeter contains no user serviceable parts. Opening product case

invalidates the warranty.

Note:

When in normal use, always fit the

SA 122BIS

windscreen provided and make sure there is

no display shipping protection foil in place.

See Chapters

3.3

and

4.2

Note:

Under no circumstances should this equipment be cleaned using a solvent based cleaner (it

can affect the case polymeric materials). Clean it with water dampened cloth only.

Note:

Battery power indicator - To improve accuracy of remaining battery life indicator, run the

dosimeter until it is fully discharged; then proceed with a full charge via the docking station.
The procedure is recommended before first use. Repeat this procedure every year of use
to maintain more accurate current battery condition indication.

Note:

If the dosimeter is flooded / falls into water - the device loses the intrinsically safe guarantee

and cannot be used in potentially explosive atmospheres.

Note:

The dosimeter should be periodically checked that it does not become unsealed, e.g. as

a result of a fall, because then it loses IP65 (Ingres Protection) rating.

Note:

Dosimeter incorporates Bluetooth

wireless communication operating in 2.4GHz RF band

and transmit power up to +9dBm.

Note:

For air-transport turn off

Bluetooth interface

(

Chapters

3.8.3

6.3.9.4

and

7.8)

“The

Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by

SVANTEK is under license. Other trademarks and trade names are those of their respective owners.

Содержание SV 104BIS




















































































































































































Результаты поиска

Содержание SV 104BIS

Отзывы:

Похожие инструкции для SV 104BIS

Бренды по названию

Популярные бренды

Svantek SV 104BIS, Руководство пользователя

Результаты поиска

Содержание SV 104BIS

Отзывы:

Похожие инструкции для SV 104BIS

Бренды по названию

Популярные бренды