Svantek SV 104BIS, Руководство пользователя

Страница: 105 / 180

105 SV 104BIS User Manual
A.10 C
ONTROL SETTING CODES
The control setting codes used in the SV 104BIS instrument (the internal software revision 1.07.1) are given
in the table below.
Table A.1. Control setting codes
Group name
Group
code
Code description
Unit type U
U104 (read only)
Serial number N
Nxxxx (read only)
Software version W
Wyyy yyy - revision number (read only)
Calibration factor Q
Qnnnn nnnn - real number with the value
of the calibration factor

(-19.9

19.9)
Measurement function
M
M2 - 1/1 OCTAVE analyser
M3 - 1/3 OCTAVE analyser
M4 -
DOSE METER
Filter type in profile n F
F1:n - Z filter for profile n
F2:n - A filter for profile n
F3:n - C filter for profile n
Filter type for Peak result calculation
in profile n
J
J1:n - Z filter for profile n
J2:n - A filter for profile n
J3:n - C filter for profile n
Detector type in profile n C
C0:n - IMPULSE detector in profile n
C1:n - FAST detector in profile n
C2:n - SLOW detector in profile n
Filter type in 1/1 OCTAVE analysis f
f1 - Z filter
f2 - A filter
f3 - C filter
Logger type in profile n B
Bx:n - x - sum of the following flags
flags:
1:n - logger with PEAK values in profile n
2:n - logger with MAX values in profile n
4:n - logger with MIN values in profile n
8:n - logger with LEQ values in profile n
16:n - logger with LAV values in profile n
Storing the results of 1/1 OCTAVE or
1/3 OCTAVE
analysis in logger’s file
b
bx - x - sum of the following flags
flags:
8 - logger with LEQ values
Logger step d
dnns - nn number in seconds

(1

60)
dnnm - nn number in minutes

( 1

60)