Svantek SV 104BIS, Руководство пользователя

Страница: 93 / 180

93 SV 104BIS User Manual
#1;
The instrument outputs in this case a file containing all control settings given in Tab. A1 in the format:
#1,Xccc,Xccc,(...),Xccc;
Example: The instrument sends the following sequence of characters as an answer for the mentioned above
request:
#1,U104,N12342,W1.08.1,Q0.01,M4,F2:1,F3:2,F1:3,J2:1,J3:2,J1:3,f1,C1:1,C0:2,C2:3,B0:1,B3:2,B15:3,
b0,d1s,D10s,K5,L0:1,L0:2,L0:3,Y3,y0,XC115:1,XC115:2,XC115:3,Xl115:1,Xl115:2,Xl115:3,S0,T1,e480
,c1:1,c1:2,c1:3,h0:1,h0:2,h0:3,x3:1,x3:2,x5:3;
means that:
•
SV 104BIS is investigated (U104);
•
number is 12342 (N12342);
•
software version number is 1.08.1 (W1.08.1);
•
calibration factor is equal to 0.01 dB (Q0.01);
•
DOSE METER is selected as the measurement function (M4);
•
A filter is selected in profile 1 (F2:1);
•
C filter is selected in profile 2 (F3:2);
•
Z filter is chosen in profile 3 (F1:3);
•
A Peak filter is selected in profile 1 (J2:1);
•
C Peak filter is selected in profile 2 (J3:2);
•
Z Peak filter is selected in profile 3 (J1:3);
•
Z filter is selected for 1/1 OCTAVE or 1/3 OCTAVE analysis (f1)
•
FAST detector is selected in profile 1 (C1:1);
•
IMPULSE detector is chosen in profile 2 (C0:2);
•
SLOW detector is selected in profile 3 (C2:3);
• logger’s buffer is not filled by the results from profile 1 (B0:1);
•
PEAK and MAX values are stored in the files of the logger from profile 2 (B3:2);
•
PEAK
,
MAX
,
MIN
and
LEQ
values are stored in the files of the logger from profile 3 (B15:3);
•
results of 1/1 OCTAVE analysis are not stored in the files of the logger (b0);
• results are stored in a logger’s file every 1
second (d1s);
•
integration period is equal to 10 seconds (D10s);
•
measurement has to be repeated 5 times (K5);
•
linear detector is selected to the LEQ calculations in profile 1 (L0:1);
•
linear detector is selected to the LEQ calculations in profile 2 (L0:2);
•
linear detector is selected to the LEQ calculations in profile 3 (L0:3);
•
delay of the start of the measurements is equal to 3 seconds (Y3);
•
synchronization the start of measurement with RTC is switched off (y0);
•
threshold level for PTC calculation in profile 1, is set to 115 dB (XC115:1);
•
threshold level for PTC calculation in profile 2, is set to 115 dB (XC115:2);
•
threshold level for PTC calculation in profile 3, is set to 115 dB (XC115:3);
•
threshold level for ULT calculation in profile 1, is set to 115 dB (Xl115:1);
•
threshold level for ULT calculation in profile 2, is set to 115 dB (Xl115:2);
•
threshold level for ULT calculation in profile 3, is set to 115 dB (Xl115:3);
•
instrument is in the Stop state (S0);
•
logger is active (T1);
•
exposition time is set to 8 hours (e480);
•
criterion level in profile 1 is chosen as 80 dB (c1:1);