Svantek SV 104BIS, Руководство пользователя

Страница: 170 / 180

170
SV 104BIS User Manual
Communication Interface and external Power Connector
The SV 104BIS electrical interface enables remote control of the instrument and data transfer up to attainable
with 3 MHz clock.
“Client” communication port
Figure C.11 Power and Communication Port (external bottom view)
Table C.7 Pin-out of the electrical interface
Pin number Function
1 Power supply: 6V
±1.3V
NOTE: Um=8V
2 Ground
3 Receiver
4 Transmitter
Real Time Clock built-in, accuracy better than 1 minute/month
Weight with the battery ~ 140 g (SV 104BIS with mounting clips and ST 104B and
SA 122BIS)
Dimensions 90x50x31 mm (base: no microphone, no mounting
accessories).
Safety
The product described above is compliant with following standards: EN/IEC 61010-1:2010
Note: The measurement circuit is safety category I according to EN/IEC 61010-1:2010 standard.
This measurement equipment should not be used for measurements in categories II, III, IV. The
input voltage should be within the 30 V Peak
–
Peak.
Category I equipment: dedicated to measurements performed on circuits not directly connected
to mains, such as circuits not derived from mains or protected mains-derived circuits, including
low-voltage circuits from power supplies.
Note: SV 104BIS acoustic measurement is contactless.
1 2
3
4