Svantek SV 104BIS, Руководство пользователя

Страница: 59 / 180

59 SV 104BIS User Manual
Using the buttons below the Setup Editor, you can:
•
choose up to ten previous settings that have been used most recently with this type of instrument,
•
Import a setup file from a PC catalogue,
•
Export current settings as a setup file to a PC catalogue,
•
Rename previous settings.
6.3.1 Editing settings
The settings are divided into several categories, such as General , Measurement , Spectrum, etc. They can be
accessed using the tabs located on the bar at the top of the Setup Editor panel. The availability of particular
categories depends on the type of instrument the edited setup file is compatible with. In case there are too
many categories to display all the tabs simultaneously, you can use the
and buttons to scroll the bar.
The settings can be easily edited using the following elements of the Setup Editor’s graphical interface:
•
check boxes
–
allowing you to select some out of several possibilities,
•
list boxes
–
allowing you to select one out of several possibilities,
•
text fields
–
allowing you to specify a text value (e.g. a file name),
•
binary buttons
–
allowing you to enable or disable an option.
In some cases, the ‘Settings currently not available’ message may appear, all settings in a particular category
being unavailable for modification. It only occurs if the particular category of settings is triggered by enabling
an option from another category in the same setup file. For example, the
Spectrum settings will be available
only if an analyser function ( e.g. 1/1 Octave) is selected in the Measurement category of settings.
Figure 6-9 Example of a category of settings unavailable due to some
other options in the same setup file being disabled
6.3.2 Applying settings
Changes that are made in setup files using the Setup editor are not automatically applied. To apply settings,
you should press the
Activate setup button.
After changing the settings, the Activate setup button changes its colour.
If you changed the settin
gs for the one instrument type but haven’t activated them, the program will warn you
about this before leaving the Setup editor.