Svantek SV 104BIS, Руководство пользователя

Страница: 111 / 180

111 SV 104BIS User Manual
4 MeasureInput
measurement input type:
2 - Microphone
5 Range
measurement range:
2 - SINGLE
6 UnitFlags
calibration flags:
b0 - if set to 1: calibration coefficient is used
b3 - if set to 1: overload occurred
b7,b6,b5: type of the result Lden
000
–
Lden result is not available
001
–
Ld result
010
–
Le result
011
–
Lde result
100
–
Ln result
101
–
Lnd result
110
–
Len result
111
–
Lden result
7 RepCycle
repetition cycle:
0 - infinity
nnnn - number of repetitions

(1

1000)
8 NofChannel
number of channels (1)
8 NofProf
number of profiles (3)
10 StartDelay
start delay time
11..12 IntTimeSec
integration time specified in seconds
13 InterfaceMode
reserved
14 LeqInt
reserved
15 SpectrumFilter
1/1 or 1/3 OCTAVE analysis filter:
1 - Z ,
2 -
A
,
3 - C
in other cases:
Reserved
16 SpectrumBuff
1/1 or 1/3 OCTAVE logger:
sum of the following flags:
8 - logger with Leq values
in other cases:
reserved
17 ExposureTime
exposure time: 1..720 (min)
18 Leq & Lav
the method of viewing results Leq and Lav
0 - Both
1 - Mutually exclusive ( visibility depends of the EXCHANGE
RATE parameter )
19 MicComp
compensating filter for microphones:
0 - switched off,
1 - switched on
20 UL Th. Level[1]
the 1
st
profile threshold level for ULT calculation 70 ÷ 140 dB (*10)
21 UL Th. Level[2]
the 2
nd
profile threshold level for ULT calculation 70 ÷ 140 dB (*10)
22 UL Th. Level[3]
the 3
rd
profile threshold level for ULT calculation 70 ÷ 140 dB (*10)
23 PEAK Th. Level[1]
the 1
st
profile threshold level for PTC calculation 70 ÷ 140 dB (*10)