HoloSpec Quick Start Guide
Unpacking the HoloSpec
2
Installing Software (Solis or SDK)
You must have administrator access on your PC to perform this installation.
The same instructions cover the installation procedure for Andor’s Solis or SDK software, which is used in
conjunction with third party software. If you are planning to run your camera through a third party interface you will
require the Andor Drivers, called SDK.
Switch on the PC, insert CD and run the
Solis (or SDK) setup .exe
file on the CD or download location.
• Confirm the version of software.
• Follow the on screen prompts.
• Select the installation directory when prompted.
• If prompted for camera type select the required camera
.
• On the final window click on
“Install”
. During the installation a number of
other windows will appear as various drivers are installed.
• To complete the installation, when prompted select “Yes, restart the
computer now” and click on the finish button.
3
For more information visit: http://www.andor.com/scientific-software
Please turn over
Spectrograph
Base Unit
Performing procedures, using controls,
or adjusting the spectrograph other than
as specified in the manual may result in
hazardous radiation exposure.
Refer to the user manual for further
information.
Detector Flange
Grating
Camera
Input Slit/ Fibre
Holder (SMA or FC)
Preparing Your Facility
Handle the HoloSpec and accessories with
care. The HoloSpec F/1.8 weighs 5.0 kg [11
lbs] and F/1.8i 8.2 kg [18 lbs].
Ensure sufficient clearance around
cameras and power supply vents (Do
not
block vents when operating on benchtop).
Keep dry, <80% humidity non-condensing.
Operate between 10°C and 40°C
Store between -20°C and 70°C.
1
Optional
Accessories**
HoloSpec
User Guides and
Documentation
Shutter
Input/
Intermediate
Accessory Slit(s)
Grating(s)
Notch Filter
* F/1.8i models have integrated
Notch chamber and filter
** Standard and optional accessory
type and specification as ordered
Performance
Sheet
Product Manuals
(On CD)
Camera
Software
(On CD)
Quick Start
Guide
