Svantek SV 104BIS, Руководство пользователя

Страница: 34 / 180

34
SV 104BIS User Manual
When the dosimeter is on the docking station, its LED shows its charging status.
LED status indication Description
GREEN continuous Dosimeter is charged.
RED continuous Dosimeter is charging.
RED flashing quickly ,
2 times per second
Charging error - temperature limits inside the dosimeter
exceeded.
Not lit
Not charging but not charged (communication is on)
If so, probably the battery may be damaged or unusable,
because charger IC in dosimeter has time limiter and turns
off LED when charging is impossible.
Table 4-2 LED status description of the SV 104BIS when dosimeter is on the Docking Station
Note: The battery inside SV 104BIS uses lithium-ion technology which requires special
consideration and handling techniques due to the extremely high energy density (see “SPECIAL
PRECAUTIONS WHEN USING AND CHARGING LITHIUM BATTERIES” clause on page
5 ).
Ensure the SV 104BIS is fully charged prior to use by installing it(them) at the Dock Station.
Note: Charging is allowed only in safe area. See the SPECIAL PRECAUTIONS WHEN USING AND
CHARGING LITHIUM BATTERIES clause on page 5 .
Note: To charge a fully discharged battery, it would take approximately 8 hours.
Note: To charge dosimeters with the use of SB 104B-5 , it is necessary to use 9V AC/DC power
supply such as the SB 33 to provide enough current performance.
USB connection doesn’t ensure
enough power to charge dosimeter(s) with the use of SB 104B-5.
4.2 B
EFORE YOU TURN THE INSTRUMENT ON
There are only a few things to remember:
•
Make sure the microphone is properly fastened onto mounting head before turning on the
instrument.
•
When in use for a measurement run, always use the
SA 122BIS
windscreen provided.
Note: On new products there is a display shipping protection foil which is used on new products
being sent to protect from accidental scratches. It is ~25x15mm foil rectangle.
Peel off the protection foil and throw away.
REMOVE and throw away