Suzuki SFV650, Руководство по обслуживанию

Страница: 532 / 573

9A-5 Wiring Systems:
Wiring Harness Routing Diagram
B944H19102005
“ a ”
1
2
9
“A”
12
10
13
11
11
“B”
“ a ”
11
“C”
“E”
11
14
4
16
17
15
7
6
5
3
8
“D”
I944H1910910-02
1. Clamp
: Bind the wiring harness, rear brake light switch lead wire and starter motor
lead wire with the clamp.
13. Clutch cable
2. Clamp
: Bind the wiring harness, HO2 sensor lead wire, starter motor lead wire and
side-stand switch lead wire with the clamp.
14. Throttle cables
3. Clamp
: Bind the wiring harness and left handlebar switch harness with the clamp.
Make sure the wiring harness not to be pinched between the front fork and
frame when the handlebars steered to the left.
15. HO2 sensor lead wire
4. Clamp
: Bind the wiring harness and starter motor lead wire with the clamp.
16. Side-stand switch lead wire
5. Clamp
: Bind the generator lead wire, neutral switch lead wire and speed sensor lead
wire with the clamp.
17. Fuel pump lead wire coupler
6. Clamp
: Bind the speed sensor lead wire with the clamp.
“A”: Pass the ignition coil lead wire upper the regulator/rectifier.
7. Clamp
: Bind the HO2 sensor lead wire and side-stand switch lead wire with the clamp.
“B”: Pass the fuel injector lead wire between the IAP sensor vacuum
hose and purge hose.
8. Clamp
: Bind the HO2 sensor lead wire, side-stand switch lead wire and speed sensor
lead wire with the clamp.
“C”: Pass the wiring harness under the starter relay.
9. Clamp
: Bind the right handlebar switch harness with the clamp.
“D”: No loose in this section.
10. Clamp
: Bind the left handlebar switch harness with the clamp.
“E”: To the horn and cooling fan
11. Fixed clamp “a”: 10 – 20 mm (0.4 – 0.8 in)
12. Front brake hose