Suzuki SFV650, Руководство по обслуживанию

Страница: 123 / 573

Engine General Information and Diagnosis: 1A-60
C23 (Use of mode select switch)
Step Action Yes No
1 1) Turn the ignition switch OFF.
2) Remove the seat. Refer to “Exterior Parts Removal and
Installation in Section 9D (Page 9D-4)”.
3) Check the TO sensor coupler (1) for loose or poor
contacts.
If OK, then measure the TO sensor voltage.
4) Disconnect the TO sensor coupler.
5) Turn the ignition switch ON.
6) Measure the TO sensor input voltage between the R
wire “A” and B/Br wire “B”.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Voltage (
)
TO sensor input voltage
4.5 – 5.5 V
((+) Terminal: R – (–) terminal: B/Br)
Go to Step 2. Open circuit in the R
wire or B/Br wire.
1
I944H1110047-01
(A)
“B”
“A”
I944H1110134-01