Suzuki Samurai 1986, Руководство по обслуживанию

Страница: 90 / 482

2) Next, check bearing cap bore diameter with-
out bearing.
On mating surface of cylinder block, five
alphabets are stamped as shown in Fig.
3-5-46.
Three kinds of alphabets (“A”, “B” and
“C”) represent following cap bore diameters.
The first, second, third, fourth and fifth (left
to right) stamped alphabets indicate the cap
bore diameter of bearing caps
“4” and “5” respectively.
For example, in Fig. 3-5-46, the first (leftmost)
alphabet “B” indicates that the cap bore dia. of
bearing cap is within 49.006 49.012 mm,
and the fifth (rightmost) alphabet “A” indicates
that the cap bore dia. of cap is within 49.000
49.006 mm.
Fig. 3-5-46 Stamped alphabets on cylinder
block
3) There are five kinds of standard bearings
differing in thickness. To distinguish them,
they are painted in following colors at the
position indicated in Fig. 3-5-47.
Each color indicates the following thicknesses
at center of bearing.
Black
1.999 2.003 mm
(0.0787 0.0788 in.)
Colorless
2.002 2.006 mm
(no paint)
(0.0788 0.0789 in.)
I
Yellow
2.005 2.009 mm
(0.0789 0.0790 in.)
Blue
2.008 2.012 mm
(0.0790 0.0791 in.)
1. Paint
Fig. 3-5-47 Paint on standard bearing
4) From the numeral stamped on crank webs of
No. 2 and No. 3 cylinders and the alphabets
stamped on mating surface of cylinder block,
determine new standard bearing to be install-
ed to the journal, by referring to the table
shown below.
For example, if numeral stamped on crank
web is “1” and alphabet stamped on mating
surface is “B”, install new standard bearing
painted in “Black” to its journal.
3-32