Suzuki Samurai 1986, Руководство по обслуживанию

Страница: 92 / 482

Measured journal diameter
44.744 44.750 mm
44.738 44.744 mm 44.732 44.738 mm
(1.7616 1.7618 in.) (1.7614 1.7616 in.) (1.7612 1.7614 in.)
Alphabets stamped
Green Red Black Red Red only
on mating surface
B
Black Red Red only Yellow Red
of cylinder block
C Red only
Yellow Red
Blue Red
Undersize bearing to be installed.
Rear Oil Seal
Carefully inspect oil seal for wear or damage. If
its lip is worn or damaged, replace oil seal.
Rear oil seal
Fig. 3-5-49 Rear oil seal
Oil Pump
Flywheel
l
If ring gear is damaged, cracked or worn,
replace flywheel.
l
If surface contacting clutch disc is damaged,
or excessibly worn, replace flywheel.
l
Check flywheel for face with a dial
If is out of limit, replace flywheel.
Limit on
0.2 mm (0.0078 in.)
Fig. Measuring t
1) Inspect oil seal lip for fault or other damage.
Replace as necessary.
2) Inspect outer and inner rotors, rotor plate,
and oil pump case for excessive wear or
damage.
l
Radial clearance:
Check radial clearance between outer rotor
and case, using thickness gauge.
If clearance exceeds its limit, replace outer
rotor or case.
Outer rotor and case 0.310 mm (0.0122 in.)
3-34