Sungrow Logger1000, Руководство пользователя

Страница: 53 / 94

43
step 6 Select the points to be measured, click Read-back to read the information from the meter in
real time to check the correctness of parameter setting.
Only when the “Read-back Value” is consistent with the displayed value of the
electric meter, the parameter setting of the measuring point is correct.
step 7 When the “Read-back Value” is consistent with the displayed value of the electric meter,
click Save Template to save the measuring point setting of this/these meter (s) as a
template.
step 8 Enter the template name in the pop-up prompt window and click Confirm on the prompt
window to save the template.
The template name should be a combination of numbers, letters, dashes and
underscores starting with English letters, with a maximum length of 32 bits.
step 9 Click Confirm on the measuring point configuring window to add the device and save the
setting.
- - End
7.8.1.7 Add the Third-party Meteo staion (Import Files)
step 1 Click Device→Device List to enter the corresponding interface.
step 2 Click Add Device , select Meteo Staion option in the Device Type .
step 3 Select the port (COM1/COM2/COM3) that the meteo staion is actually connected to in the
Port .
step 4 Select Others option in the Device Model .
step 5 Select Import Files option in the Configuration Method .
step 6 Select the corresponding measuring point template in the Configuration File . Or click the
icon to import the configuration file.
step 7 Enter the value of Beginning Address and the Quantity of Device , click Save .
The Modbus ID addresses of the devices connected in the same COM port of
Logger1000 cannot be repeated.
- - End
7.8.1.8 Add the Third-party Meteo staion (Custom)
step 1 Click Device→Device List to enter the corresponding interface.
step 2 Click Add Device , select Meteo Staion option in the Device Type .
step 3 Select the port (COM1/COM2/COM3) that the meteo staion is actually connected to in the
Port .
User Manual 7 WEB Interface